A distinctive entry point gantry structure welcomes motorsport enthusiasts of The Motor Enclaves at Tampa, Florida. The gantry structure is made of two 40-foot-high cube containers and steel frames.
This is a research and development project with the long-term goal to design a circular timber house that is energy-efficient and provides excellent living comfort using a rotation system according to the sun's position.
This project aims to rehabilitate, extend, and enhance the former Haras ice rink, located near the Château d'Angers, a castle in the city of Angers, belonging to the ABF sector (Architectes des Bâtiments de France). The aim is to create a modern sports facility that meets the needs of the local community while preserving the existing architectural heritage.
The new sports hall of the Alice Salomon School in Hanover is exceptional from an architectural and structural point of view. The timber structure stands on a reinforced concrete first floor and cantilevers above it at the sides about 18 ft.
An 88.18-ton steel structure subjected to high thermal and mechanical stresses had an obsolete fastening system that no longer met the current ergonomic requirements. The study of a new fastening system was based on specifications that required significant ergonomic improvement, certified resistance to stress, low costs, low space requirements, and ease of implementation and operation.
In May 2022, the new Sky Bridge footbridge opened in the Dolní Morava area (Czech Republic); it is the longest footbridge in the world, with a length of 2,365.49 ft. The design and construction of the footbridge were carried out by TAROS NOVA a.s., and the structural analysis was performed in RFEM 5.
The SDEA Engineering Solutions Advanced Engineering department has extensive experience in mechanical-structural analysis using the finite element method for various structure types and equipment for different industrial sectors such as steel, metalworking, oil and gas, energy, railroads, and metallurgy, among others, as well as for the construction sector.
The Silk Road Exhibition Center is located northeast of the city of Xi'an, the starting point of the ancient Silk Road. Together with the International Conference Center, it forms the exhibition center complex.
The Knies Magician's Hat is the 2021 highlight of the reopened "Knies Kinderzoo" (personal petting zoo experience for children) in Rapperswil on Lake Zurich, Switzerland. The impressive shell structure was built using timber elements and rises to a height of 85 ft.
This hydraulic dam project, located in the Provence-Alpes-Côte d'Azur region (PACA), included design consideration for the control valve’s rotational axis deformation, maximum stress, and material fatigue behavior.
High Point "E" is a residential building with approximately 107,639 ft² of living space (13-story residential building on a 2-story base structure with a 2-story underground parking garage).
The scaffolding structure consists of aluminum trusses with heights varying between 1.64 ft and 3.28 ft as well as horizontal steel beams, columns, railings, and bracings. All elements are based on the PlusEight system.
This multi-material tower structure includes mainly timber and steel elements. Only the foundation and attached rigid columns were constructed as reinforced concrete.
This project was designed using BIM technology. During the documentation process, IFC files were used for the data exchange. The architectural building model was first created in REVIT, then exported to RFEM to apply loads and complete the full structural analysis and design.
The new VoltAir office building in Berlin includes a 394 ft x 213 ft area and a height close to 98 ft. The building envelope consists of multiple box elements which form the interior and exterior corners.
The goal of the hydroelectric power plant project was to analyze the resistance of a double mechanical displacement system on rails subjected to tensile stress.
For a project in Rotterdam, ADS Ertner used IDEA CONNECTION to analyze a structural steel connection. This program calculates steel connections utilizing the CBFEM method, where each thin-walled cross-section is modeled with nonlinear material properties, nonlinear bolts, and nonlinear welds. In order to transfer loads, ADS Ertner needed to use blocks in the connection model. In IDEA CONNECTION, blocks are not easily integrated with thin-walled plates.
The chapel adjoining the old convent of San Pedro in Lugo, Spain is an original construction dating back to 1690. Its ancient roof structure was based on trusses simply supported in putlog holes located in the main wall of the church. Damage appeared here. Over time, the lower vault of the structure deteriorated to the point of limiting access to the interior.
The renovation consisted of completely replacing the roof in order to make the space below fully usable again and to provide natural light to the main temple room through the stunning church windows. Previously, the windows were boarded up in order to support the roof trusses.
A chipboard factory in Germany was renovated at the beginning of 2014. The main structural elements were made of S235 steel hot‑rolled shapes and the structure was set on a slab foundation.
The boiler supporting structure with a combustion chamber is used as the main stiffening element of the coal‑fired plant in Neyveli, Tamil Nadu, India.
The boiler supporting structure measures 100 ft x 100 ft x 406.8 ft and, together with the boiler roof arranged above, it has to withstand loads of about 50,706 t.
In many industrial sectors, China is the future market. This is also the case for the entertainment field, in which the German company Maurer Söhne works.
The Dragon Flight roller coaster is being built for Romon U‑Park, an urban theme park in Ningbo. It is the first X‑Train Flying Launch Coaster designed by Maurer Söhne.
The extension of the shopping mall "Centrum Černý Most" in Prague was completed and opened in March 2013. The project was designed by architects from the British company Benoy.
From an architectural point of view, the most impressive structural component of the Černý Most shopping mall is the partially glazed roof above the food court. The featured steel structure was built for this roof.
An extraordinary new outdoor theatre opened in Bytom, Poland in August 2014. From a structural engineering point of view, the building consists of two parts (a theater stage and a backstage) geometrically interconnected by a spatial-shaped roof. This gives the structure its remarkable design.
Janson Bridging in Hank, the Netherlands, produces temporary, emergency, and permanent bridges for civil, industrial, and military use. All these bridges - consisting of several types - are based on modular concepts that can be easily adjusted to the requests of the customer.
Skywalk Allgäu is a path with a length of about 1,640 ft, installed at a height of 49 to 98 ft above ground, leading through the treetops of the Allgäu Alps. The path construction, built at approximately 3,281 ft above sea level, consists of cable-stayed and suspension bridge constructions. It is supported by 14 towers guyed with cables. The central point and major tourist attraction is the lookout tower, which is 164 ft high, offering visitors a wonderful view over the Alps, the Prealps, and Lake Constance.
Baesweiler, a small German town near Aachen, decided to return to its citizens a burden dump that was used in the former mining industry but had been abandoned since 1975; this project was meant to be the starting point for the development of a technology park.
For the construction of a new elementary and high school building in Laupheim, Germany, the city of Laupheim organized an architectural competition, which was won by the Herrmann + Bosch Architekten studio from Stuttgart.